Preparation of the Surface
The surface should be clean and dry. Before applying the paint, remove any old loose parts of the base surface which reduce adhesiveness, old paint and plaster coats with insufficient adhesiveness. Remove any dust, dirt, remnants of oil or emulsion paint and any agents which prevent adhesiveness (oils, fats, waxes). Repair any cavities in the base surface with the appropriate materials, depending on the surface type. Paint new plasters after they have dried, no sooner however than 28 days after they have been placed. Treat absorbent surfaces (e.g. aerated concrete) with Platinum SP-GU universal primer or diluted EXTRA WHITE paint. Treat strongly soiled surfaces with PRIMING paint. Appropriate preparation of the base surface through the unification of its absorbency and colour has a considerable effect on, amongst other things, the consumption of EXTRA WHITE paint.
Implementation
EXTRA WHITE paint is supplied ready to use. Stir the paint thoroughly before painting. Do not mix it with other paints, mortars, etc. Manual or mechanical methods of application are allowed: with a roller, paintbrush or by spraying, depending on the conditions and state of the base surface, making sure the paint is applied evenly. The temperature of the painted surface and of the environment during the painting should be above +5°C. Where it is necessary to adapt the product thickness to the application method of choice, after stirring the paint may be diluted with clean water no more than 5% by volume. After the paint dries, no sooner, however, than after 2 hours, another layer can be applied. Factors such as the absorbency of the surface, temperature and humidity of the air and/or of the surface in the painted spaces have a considerable effect on the quickness of paint drying. Protect the surfaces which are not to be painted (doors, windows, etc.) thoroughly to avoid splashing them with the paint. Rinse fresh splashes of paint immediately with plenty of water. After it dries, the paint can only be removed mechanically. Wash the tools with clean water immediately after use.
Caution
In case of contact of the product with eyes or skin, rinse them with plenty of water and seek medical advice. Keep away from children. During work, wear protective clothing and eye protectors.
User safety
In addition to the above recommendations, follow good building practice and work-safety rules. The manufacturer warrants the quality of the product but has no influence on the manner, place and conditions of its storage and application. Painting work should be done by professionally qualified contractors. The conditions in which the paint is prepared and the manner of its application may have an effect on the appearance of the surface.